Pulsar M 3000 RT3U HotSwap HW
Out of Stock
Maximum availability Configuration Double conversion on-line UPS with automatic by-pass and power factor correction. ... Read More
This product is no longer in stock
Double conversion on-line UPS with automatic by-pass and power factor correction.
The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard.
Continuous power supply
Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the batteries to be replaced without interrupting the power supply.
Long backup times
1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar 3000XL has a built-in high speed charger for additional long backup times.
The ModularEasy kit makes it easy to parallel 2 standard Pulsar M UPSs (N + 1 redundancy).
Minimum total cost of ownership
A simple, low cost solution for uprating by adding a second standard UPS.
Multilingual display. Access to a wide range of measurements and set-up menus.
A wide range of options using the Solution-Pac supplied: SNMP and HTML, ModBus/JBus and relay outputs.
Pulsar has unmatched adaptability.
Pulsar is available in tower format or RT2U convertible rack/tower version (for shallow rack mounting).
With FlexPDU and HotSwap MBP, the RT2U models can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
Compatible with high power factor loads
Pulsar is rated for 0.9 total power factor.
USB + serial + remote start/stop + slot for optional communications card.
|Certification||CE, TüV GS, CB report, UL 1778 cUL CSA 22.2|
|Colour of product||Grey|
|Compatibility||Servers, PC's, data storage, network & medical equipment|
|Dimensions (WxDxH)||440 x 490 x 131 mm|
|Form factor||RT3U (tower / rack 3U)|
|I/O ports||1 x USB, 1 x RS232, 1 x mini terminal block.|
|Input connection type||terminal block|
|Noise level||45 dB|
|Nominal input voltage||100/120/160/184 - 284 V|
|Nominal output voltage||230 V|
|Operating temperature range (T-T)||0 - 40 °C|
|Output connections||8 IEC C13(10A) + 1 IEC C19(16A)|
|Output power||2700 W|
|Output power capacity (VA)||3000 VA|
|Output voltage note||200/208/220/240|
|Power supply input frequency||40 - 70 Hz|
|Safety||IEC/EN 62 040-3, IEC/EN 62040-1-1, IEC/EN 60950-1 (RD), IEC/EN 62 040-2 C1 Class|
|Serial ports quantity||1|
|Typical backup time at half load||15 min|