APC SMT2200I Smart-UPS 2200VA LCD 230V
  • APC SMT2200I Smart-UPS 2200VA LCD 230V
  • APC SMT2200I Smart-UPS 2200VA LCD 230V

Please Note, this product is not for consumer use in the European Union.

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.



Predictive replace battery date

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.



Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.



Energy meter

Provides actual kilowatt hours of usage for energy conscious users.



Sequenced shutdown and restart

Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).



Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.



Single switched outlet group

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.



StruxureWare Central compatible

Enables centralized management via StruxureWare Central.
AC outlet types C13 coupler,C19 coupler
AC outlets quantity 9 AC outlet(s)
Battery capacity 783 VAh
Battery recharge time 3 h
Battery technology Sealed Lead Acid (VRLA)
Cable length 1.83 m
Cables included RS-232,USB cable
Certification CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE, REACH, PEP, EOLI
Colour of product Black
Depth 544 mm
Dimensions (WxDxH) 435 x 197 x 544 mm
Efficiency 97.9 %
Form factor Tower
Height 435 mm
Hot-swap battery Yes
I/O ports 1 x IEC-320 C20
1 x Schuko CEE 7 / EU1-16P
1 x BS1363A
Input operation voltage (max) 302 V
Input operation voltage (min) 151 V
LED indicators Status
Maximum current 10 A
Noise level 45 dB
Nominal input voltage 230 V
Nominal output voltage 230 V
Non-operating altitude 0 - 15000 m
Operating altitude 0 - 3000 m
Operating relative humidity (H-H) 0 - 95 %
Operating relative humidity range 5 - 95 %
Operating temperature (T-T) 0 - 40 °C
Operating temperature range (T-T) 0 - 40 °C
Output connections 8 x IEC 320 C13
1 x IEC 320 C19
Output power 1980 W
Output power capacity (VA) 2200 VA
Output voltage note 220/230/240
Package dimensions (WxDxH) 699 x 381 x 762 mm
Package height 699 mm
Package weight 61900 g
Package width 381 mm
Power supply input frequency 50/60 Hz
Quantity per pallet 9 pc(s)
Quick installation guide Yes
Replacement battery cartridge RBC55
RoHS compliance Yes
Serial ports quantity 3
Source data-sheet Icecat.biz
Storage relative humidity (H-H) 0 - 95 %
Storage relative humidity range 5 - 95 %
Storage temperature (T-T) -15 - 45 °C
Storage temperature range (T-T) -15 - 45 °C
Surge energy rating 365 J
Typical backup time at full load 8.7 min
Typical backup time at half load 25 min
Waveform Sine
Weight 48800 g
Width 197 mm

Specific References

EAN13
0731304274025

APC Smart-UPS SMT2200I

Smart-UPS 2200VA LCD 230V

Out of Stock
£33,374.86
Tax excluded
Reference: SMT2200I
Quantity