Rack Power (209 products)

Pulsar M 2200 RT3U HotSwap HW

Maximum availabilityConfigurationDouble conversion on-line UPS with automatic by-pass and power factor correction.PowershareThe Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard.Continuous power supplyHot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the batteries to be replaced without interrupting the power supply.Long backup times1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar... More Info

Pulsar M RT3U HotSwap: Pulsar M 3000 RT + rack kit + HotSwap MBP, IEC Sockets

Modular on-line double conversion UPSMaximum availability- Configuration. Double conversion on-line UPS with automatic by-pass and power correction factor.- Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the UPS to be replaced without interrupting the power supply.- Redundancy. The ModularEasy kit makes it easy to parallel 2 standard Pulsar M UPSs (N + 1 redundancy).- Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time.... More Info

RACK PDU BASIC 2U 32A 230V (4) IEC 309-32

The most mounting options in the market.APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal and vertical units are available as well as a variety of power inputs and outputs to fit most power environments. APC now offers Basic Rack PDUs that mount vertically, without tools in the rear channel of a NetShelter VX. More Info

SmartPro Rack/Tower UPS - 500 VA - 300 W

Tripp Lite's SMX500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 17 minutes half load runtime and 5 minutes at full load. Maintains regulated 230V nominal output without using battery power during brownouts as low as 187V. 500VA/300 watt power handling... More Info

Rack PDU, Metered, Zero U, 22kW, 400V, (6) C19

APC Metered Rack PDU , Input: 400V 3PH , Input Connections: IEC 309 32A 3P+N+PE , Cord Length: 6 feet ( 1.83 meters ) , Output: 230V , Output Connections: IEC 320 C19 Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable.-Flash Upgradeable.-High Power Density. -Information Displays.-Network Management. -Remote Current Monitoring. -Toolless mounting capabilities. -Vertical Mounting Capabilities. More Info

Power Cord Kit (6 ea), Locking, C19 to C20, 1.2m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. More Info

Rack PDU 2G, Switched, ZeroU, 16A, 230V, (7) C13 & (1) C19, IEC309 Cord

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize... More Info

BS 1363 to 2 x C13, 2 m, 473 g

Replace your overused or misplaced power cable, or just manage your power more efficiently. This handy cable features a UK plug which splits to two female C13 shroud. Simply plug the power cord's male prong into a standard power outlet, and you're ready to power multiple electronic devices.Saves space by eliminating extra cords, and keeps your surge strip and UPS outlets from being blocked by bulky AC transformers. Ideal for use in compact workplaces or home offices where there is limited space for electronic equipment. Plus this heavy duty... More Info

Smart-UPS X 1000VA Rack/Tower LCD 230V

Please Note, this product is not for consumer use in the European Union.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.High frequency designReduces or eliminates bulky transformers resulting in lighter units for ease of handling.Auto recognition of external batteriesUPS recognizes when external battery packs are attached and automatically adjusts runtime.Predictive replace battery dateDynamically provides the month and year... More Info

APC Symmetra LX 16kVA Scalable to 16kVA N+1 Tower, 220/230/240V or 380/400/415V

APC Symmetra LX, 16000VA/11200W, Input 230V, 400V 3PH/Output 230V, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model Includes: CD with software, Documentation CD, Installation Guide, User Manual, Web/SNMP Management Card General Features: Audible Alarms, Automatic internal bypass, Automatic restart of loads after UPS shutdown, Automatic self-test, Battery modules connected in parallel, Cold-start capable, Configurable for N+1 internal redundancy, Disconnected battery notification, Field-replaceable power distribution panel,... More Info

Pulsar M 3000 RT3U HotSwap HW

Maximum availabilityConfigurationDouble conversion on-line UPS with automatic by-pass and power factor correction.PowershareThe Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard.Continuous power supplyHot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the batteries to be replaced without interrupting the power supply.Long backup times1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar... More Info

Rack PDU,Basic,ZeroU,16A,230V,(20)C13 & (4)C19; IEC309

APC Basic Rack PDU, Input: 230V, Input Connections: IEC 309 16A 2P+E, Cord Length: 3 feet ( 0.91 meters ), Output: 230V, Output Connections: IEC 320 C13, IEC 320 C19. Includes: Installation guide, Toolless Mounting Kit. More Info